Web Content Filters

Filters Applied

Source

  • Reports
  • Clear all

    Refine Results

    Keyword(s)

    Web Content Listing

    NACE SP0109-2019: Application of Tape Coatings for External Corrosion Protection of Buried Metal Pipelines (Revised)

    Published: February 25, 2019

    This updated NACE International standard practice provides the most current technology and industry practices for material requirements and the use of tape coatings for external mainline coating, coating repair, coating rehabilitation, and coating weld joints on...

    Report from NACE Reports (NACE International)

    NACE Publication 21429-2018: State of the Art Report on Corrosion-Resistant Reinforcement

    Published: February 02, 2019

    This NACE International state-of-the-art report contains information about materials that provide a corrosion-resistant alternative to plain carbon steel reinforcing bar (rebar). The report is intended for use by engineers when considering the use of alternative...

    Report from NACE Standards (NACE International)

    NACE Publication 21428: Corrosion Inhibiting Admixtures for Reinforced Conrete—A State of the Art Report

    Published: January 31, 2019

    The purpose of this technical committee report is to present state of the art information on corrosion inhibiting admixtures. It is intended to provide specifiers, designers, and corrosion control personnel information to control the corrosion of conventional...

    Report from NACE Standards (NACE International)

    NACE Publication 01102: State-of-the-Art Report: Criteria for Cathodic Protection of Prestressed Concrete Structures

    Published: March 08, 2018

    This NACE International state-of-the-art report is intended for use by engineers when evaluating criteria whereby prestressed concrete structures and members can be protected from corrosion by means of cathodic protection (CP).

    Report from NACE Standards (NACE International)

    NACE Publication 01101: Electrochemical Chloride Extraction from Steel-Reinforced Concrete–A State-of-the-Art Report

    Published: February 02, 2018

    The purpose of this NACE technical committee report is to present state-of-the-art information on electrochemical chloride extraction (ECE) from conventionally reinforced concrete surfaces. Included are discussions of common industry practices used by design...

    Report from NACE Standards (NACE International)

    1D182 Wheel Test Method Used for Evaluation of Film-Persistent Corrosion Inhibitors for Oilfield Applications

    Published: June 01, 2017

    This report describes the wheel test and discusses the various conditions in which it has been used. The wheel test is a dynamic test performed by placing fluids (oil, water, and inhibitor) in a 200 mL (6.80 oz) beverage bottle with a metal test specimen, purging...

    Report from NACE Reports (NACE International)

    35100 In-Line Nondestructive Inspection of Pipelines

    Published: April 11, 2017

    The purpose of this technical committee report is to analyze available and emerging technologies in the field of in-line inspection tools and review their status with respect to characteristics, performance, range of application, and limitations. It is intended as a practical reference for both new and experienced users of ILI technology. This is a support document for the API(1) 11631 standard where it is referenced.

    Report from NACE Reports (NACE International)

    NACE Publication 21415 Potential Effects of Upstream Additives on Refinery Corrosion and Fouling

    Published: January 15, 2017

    The scope of feedstocks to be discussed in this report includes: conventional crude (or pool) oils, unconventional oils (such as bitumens, synthetic crudes derived there from, dilbits, synbits, etc), shale or tight oils, and natural gas condensates. More complete...

    Report from NACE Standards (NACE International)

    Corrosion of Structural Materials by Lead-Based Reactor Coolants

    Published: November 01, 2014
    Author(s): D.P. Abraham, L Leibowitz, V A. Maroni, S.M. McDeavitt, A.G. Raraz, Argonne National Laboratory

    Advanced nuclear reactor design has, in recent years, focused increasingly on the use of heavy-liquid-metal coolants, such as lead and lead-bismuth eutectic. Similarly, programs on accelerator-based transmutation systems have also considered the use of such...

    Report from U.S. Department of Energy, Office of Scientific and Technical Information ( US Government-Other)

    Microbially Promoted Solubilization of Steel Corrosion Products and Fate of Associated Actinides

    Published: July 16, 2014
    Author(s): Yuri A. Gorby, James K. Fredrickson, Pacific Northwest National Laboratory; Gill G. Geesey, Montana State University; Frank Caccavo, Jr. Whitworth College

    The research is designed to develop a safe and effective biological approach for decontaminating mild and stainless steels that were used in the production, transport, and storage of radioactive materials.

    Report from U.S. Department of Energy, Office of Scientific and Technical Information ( US Government-Other)